HeuJung
072b3f50d9
계획서 §검증 후반부를 다시 대조해 미구현 3건을 확인하고 모두 구현했다. 앞선 커밋에서 "미구현 1건" 으로 보고한 것은 §12 불변식 표만 파일로 대조하고 §검증 섹션의 표 두 개는 확인하지 않은 결과였다. - 설치 2단계 요구사항 화면에 자산 URL 방식 항목 추가. 판정은 서버가 아니라 브라우저가 한다 — 서버에서 자기 APP_URL 로 요청하면 loopback 이 vhost·프록시 체인을 우회해 실제 방문자와 다른 답을 낸다. 2단계와 3단계가 같은 판정 함수를 쓰도록 추출했다 - 대시보드가 스스로 프로브를 던져 **저장된** 방식과 대조하고 어긋나면 안내한다. 런타임 값이 아니라 저장값을 보는 이유는, 자가 복구가 이미 전환해 놓았을 때가 바로 알려야 할 상황이기 때문이다 — 봇은 자바스크립트를 실행하지 않아 자가 복구가 닿지 않는다. 알리기만 하고 저장하지 않으므로 클라이언트가 서버 설정을 뒤집지 않는다 - 레이아웃 렌더링 테스트를 두 모드로 추가. 핵심 단언은 두 모드의 DOM 이 완전히 동일하다는 것이다 — 모드가 화면 구조로 새어나가면 확장자 없는 환경에서만 깨지고 그 환경은 개발 중 거의 재현되지 않는다 함께 고친 테스트 격리 결함 4건 (이번 기능과 무관하나 같은 세션에서 발견): - 인스톨러 공유 클래스 로드가 오토로드를 막고 있어, 앱 루트를 임시 디렉토리로 바꾸는 테스트에서 없는 파일을 읽으려다 죽었다 (8건 fatal) - 테스트용 번역 스텁이 실제 구현과의 정의 경쟁에서 이기면 주입된 번역을 무시했다. 클래스 단독 실행은 통과하고 스위트 실행만 실패하던 원인 - 모듈 활성 목록은 "디스크 로드분 ∩ DB 활성분" 인데 부팅 시 테이블이 비어 디스크 스캔이 일어나지 않아, 파일 캐시 잔재가 있을 때만 통과하던 순서 의존 테스트 - 라우트 프로바이더 가드 테스트가 Git 미추적 파일(.env) 존재에 의존해 신규 클론·CI 에서 실패했다. 임시 앱 루트로 격리 또한 일부 테스트가 실제 개발 환경 파일을 삭제·재생성하고 자신의 정리 단계에서 되돌리는데, 그 테스트가 죽으면 되돌아오지 않아 복구 불가능한 유실이 발생한다. 실제로 이번 세션에서 겪었으므로 테스트 부트스트랩에 프로세스 수준 복원 안전망을 추가했다. 검증: 백엔드 344건 / 템플릿 2799건 / 레이아웃 7건 / 브라우저 9건 green, audit 위반 0.
930 lines
56 KiB
PHP
930 lines
56 KiB
PHP
<?php
|
|
|
|
// /install/lang/en.php
|
|
|
|
return [
|
|
// Common
|
|
'next' => 'Next',
|
|
'previous' => 'Previous',
|
|
'install' => 'Install',
|
|
'cancel' => 'Cancel',
|
|
'yes' => 'Yes',
|
|
'no' => 'No',
|
|
'loading' => 'Loading...',
|
|
'saving' => 'Saving...',
|
|
'save_failed' => 'Save failed',
|
|
'error' => 'Error',
|
|
|
|
// Step 0: Welcome
|
|
'welcome_title' => 'Getting Started with Gnuboard7',
|
|
'welcome_desc' => 'Welcome to Gnuboard7. This is the first step of the installation.<br>Follow the guided steps in order to complete the required environment setup quickly and reliably.',
|
|
'select_language' => 'Select Language',
|
|
'storage_permission_check' => 'Directory Permission Check',
|
|
'storage_permission_required' => 'Storage Folder Permission Required',
|
|
'storage_permission_failed' => 'Insufficient storage folder permissions',
|
|
'storage_not_exists' => 'Storage Folder Not Found',
|
|
'storage_not_exists_message' => 'The storage folder does not exist. Please create a storage folder in the project root.',
|
|
'storage_not_writable' => 'Storage Folder Not Writable',
|
|
'storage_not_writable_message' => 'The storage folder is not writable. Please check the folder owner or group permissions.',
|
|
'storage_ownership_mismatch' => 'Storage Folder Ownership Mismatch',
|
|
'storage_ownership_mismatch_message' => 'The storage folder owner (:owner) does not match the web server user (:web_user). Current permissions (:permissions) allow only the owner to write, so the web server cannot write. Please apply one of the options below.',
|
|
'storage_permission_guide' => 'Please grant <strong>755</strong> permission to the Storage folder.',
|
|
'storage_permission_guide_detail' => 'Run the command below or change permissions via FTP:',
|
|
'storage_permission_command_linux' => 'chmod -R 755 :path',
|
|
'current_owner' => 'Owner',
|
|
'current_group' => 'Group',
|
|
'current_permissions' => 'Permissions',
|
|
'required_permissions' => 'Required',
|
|
'unknown' => 'Unknown',
|
|
'recheck_permission' => 'Recheck',
|
|
'permission_checking' => 'Checking permissions...',
|
|
|
|
// Step 1: License
|
|
'license_title' => 'License Agreement',
|
|
'license_agreement' => 'License Terms',
|
|
'i_agree' => 'I agree to the above license terms',
|
|
'must_agree' => 'You must agree to the license to continue.',
|
|
'license_not_found' => 'License information not found.',
|
|
|
|
// Step 2: Requirements
|
|
'checking_requirements' => 'Checking server requirements...',
|
|
'php_version' => 'PHP Version',
|
|
'php_modules' => 'PHP Modules',
|
|
'directory_permissions' => 'Directory Permissions',
|
|
'disk_space' => 'Disk Space',
|
|
'https' => 'HTTPS',
|
|
'opcache' => 'OPcache',
|
|
'required' => 'Required',
|
|
'enabled' => 'Enabled',
|
|
'not_enabled' => 'Not Enabled',
|
|
'recommended' => 'Recommended',
|
|
'needs_fix' => 'Needs Fix',
|
|
'requirements_check_failed' => 'Requirements check failed',
|
|
'all_requirements_met' => 'All requirements are met.',
|
|
'some_requirements_failed' => 'Some requirements are not met. Please check your server configuration.',
|
|
'recheck' => 'Recheck',
|
|
'requirements_not_met' => 'Required conditions are not met. Please check your environment and try again.',
|
|
'badge_required' => 'Required',
|
|
'badge_optional' => 'Optional',
|
|
'or_above' => 'or above',
|
|
'fix_permission' => 'Insufficient write permission',
|
|
'including_subdirectories' => 'including subdirectories',
|
|
'and_more' => 'and :count more',
|
|
'error_php_version' => 'PHP Version',
|
|
'error_missing_extensions' => 'Missing required PHP extensions',
|
|
'error_disk_space' => 'Disk Space',
|
|
'error_directory_permissions' => 'Insufficient directory write permissions',
|
|
'error_required_files' => 'Required files missing',
|
|
'error_required_files_missing_label' => 'Required files missing',
|
|
'error_required_files_not_writable_label' => 'Required files not writable',
|
|
'error_required_files_ownership_mismatch_label' => 'Required files ownership mismatch',
|
|
'ownership_mismatch_option_666' => '[Alternative 2] Last resort — grant write permission to the file for everyone (reduced security, not recommended):',
|
|
'required_files' => 'Required Files',
|
|
'file_exists' => 'Exists',
|
|
'file_missing' => 'Missing',
|
|
'file_not_writable' => 'Not Writable',
|
|
'required_files_fix_guide' => 'Run the following command in your project root:',
|
|
'minimum' => 'minimum',
|
|
'required_text' => 'required',
|
|
|
|
// Step 3: Configuration
|
|
'database_settings' => 'Database Settings',
|
|
'database_type' => 'Database Type',
|
|
'db_host' => 'Database Host',
|
|
'db_port' => 'Port',
|
|
'db_name' => 'Database Name',
|
|
'db_username' => 'Username',
|
|
'db_password' => 'Password',
|
|
'db_prefix' => 'Table Prefix',
|
|
'db_prefix_hint' => 'Prefix added to all table names. (e.g., g7_users, g7_posts) Up to 6 characters.',
|
|
'db_prefix_placeholder' => 'g7_',
|
|
'test_write_db_connection' => 'Test Write DB Connection',
|
|
'test_read_db_connection' => 'Test Read DB Connection',
|
|
'use_read_db' => 'Use Read DB Settings',
|
|
'database_settings_read' => 'Database Settings (Read DB) - Optional',
|
|
|
|
'site_settings' => 'Site Settings',
|
|
'app_name' => 'Site Name',
|
|
'app_url' => 'Site URL',
|
|
|
|
'admin_account' => 'Admin Account',
|
|
'admin_name' => 'Admin Name',
|
|
'admin_language' => 'Admin Language',
|
|
'admin_email' => 'Admin Email',
|
|
'admin_password' => 'Admin Password',
|
|
'admin_password_confirm' => 'Confirm Password',
|
|
|
|
'start_installation' => 'Start Installation',
|
|
|
|
// Step 5: Installation
|
|
'installation_title' => 'Installation in Progress',
|
|
'installation_in_progress' => 'Installing Gnuboard7. Please wait...',
|
|
'installation_in_progress_message' => 'Installation is in progress. Redirecting to installation page.',
|
|
'overall_progress' => 'Overall Progress',
|
|
'preparing' => 'Preparing...',
|
|
'waiting_installation' => 'Waiting for installation to start...',
|
|
'processing' => 'Processing...',
|
|
'installation_complete' => 'Installation Complete',
|
|
'installation_failed' => 'Installation Failed',
|
|
'retry_installation' => 'Retry',
|
|
'do_not_close_page' => 'Do not close this page until the installation is complete.',
|
|
'installation_log' => 'Installation Log',
|
|
'hide_log' => 'Hide Log',
|
|
'show_log' => 'Show Log',
|
|
'back_to_settings' => 'Back to Settings',
|
|
'progress_status' => 'Installation List',
|
|
'hide_progress' => 'Hide Installation List',
|
|
'show_progress' => 'Show Installation List',
|
|
'installation_completed' => 'Installation Complete!',
|
|
'recommendations' => 'Post-Installation Recommendations',
|
|
'recommendation_env_permission' => 'Set .env file permissions to 644 (chmod 644 .env)',
|
|
'recommendation_https' => 'Use HTTPS in production environment',
|
|
|
|
// .env permission hardening hint (Step 5 completion screen, shown when not 0600)
|
|
'env_hardening_hint_title' => '.env Permission Hardening (Optional)',
|
|
'env_hardening_hint_current_status' => 'Current .env permission is %s (owner: %s). The most secure permission is 0600 (owner read/write only). To apply additional hardening, run the appropriate command below with sudo based on your environment.',
|
|
'env_hardening_hint_option_strict' => 'CLI user = web server user (single-user environment)',
|
|
'env_hardening_hint_option_group' => 'CLI user ≠ web server user (self-hosted server, etc. — group-readable compromise)',
|
|
'env_hardening_hint_note' => 'Verify your environment before running. Applying the wrong permission may prevent the web server from reading .env and cause the site to stop responding.',
|
|
|
|
// Step 5: Complete
|
|
'installation_info' => 'Installation Information',
|
|
'installation_complete_message' => 'Gnuboard7 has been successfully installed!',
|
|
'installed_version_label' => 'Installed version:',
|
|
'site_url' => 'Site URL',
|
|
'installed_at' => 'Installed At',
|
|
'go_to_admin_login' => 'Admin Login',
|
|
|
|
// Re-entry
|
|
'completed_tasks' => 'Completed Tasks',
|
|
'interrupted_task' => 'Interrupted Task',
|
|
'pending_tasks' => 'Pending Tasks',
|
|
'interrupted_during_execution' => 'Interrupted during execution',
|
|
'resume_continue' => 'Continue',
|
|
'installation_resuming' => 'Installation Resuming',
|
|
|
|
// Error Messages - Common
|
|
'error_occurred' => 'An error occurred',
|
|
'please_try_again' => 'Please try again.',
|
|
'invalid_input' => 'Invalid input.',
|
|
|
|
// Error Messages - Validation (Database)
|
|
'error_db_host_required' => 'Database host is required.',
|
|
'error_db_name_required' => 'Database name is required.',
|
|
'error_db_username_required' => 'Database username is required.',
|
|
'error_db_credentials_required' => 'Database name and username are required.',
|
|
'error_db_username_privileged' => 'For security reasons, G7 cannot be installed with the ":username" account. If a superuser account is compromised, the entire database is at risk. Please create a dedicated database user for G7, grant it only the privileges it needs, and enter that account instead.',
|
|
'error_db_prefix_too_long' => 'Table prefix may be up to :max characters. (entered: :current) A long prefix makes some table index names exceed the database identifier limit.',
|
|
'error_db_privileges_insufficient' => 'Insufficient database privileges.',
|
|
'error_db_not_tested' => 'Please test the database connection first.',
|
|
'error_write_db_not_tested' => 'Please test Write DB connection first.',
|
|
'error_read_db_not_tested' => 'Please test Read DB connection first.',
|
|
|
|
// Error Messages - Validation (Database) (detailed)
|
|
'error_db_privileges_insufficient_detail' => 'Insufficient privileges for :type database: :missing',
|
|
'error_db_connection_failed_detail' => ':type database connection failed: :error',
|
|
'error_db_test_failed' => 'Error occurred during database testing',
|
|
|
|
// Error Messages - Validation (Admin Account)
|
|
'error_admin_email_invalid' => 'Please enter a valid email address.',
|
|
'error_admin_language_invalid' => 'Please select a valid language.',
|
|
'error_admin_name_required' => 'Please enter admin name.',
|
|
'error_admin_password_required' => 'Please enter admin password.',
|
|
'error_admin_password_min' => 'Password must be at least 8 characters long.',
|
|
'error_admin_password_confirm_required' => 'Please enter password confirmation.',
|
|
'error_password_mismatch' => 'Passwords do not match.',
|
|
'error_app_name_required' => 'Please enter site name.',
|
|
'error_app_url_required' => 'Please enter site URL.',
|
|
'error_field_required' => 'This field is required.',
|
|
|
|
// Error Messages - System (Requirements)
|
|
'error_requirements_check_failed' => 'An error occurred while checking requirements.',
|
|
'error_php_version_insufficient' => 'PHP version does not meet requirements.',
|
|
'error_php_extensions_missing' => 'Some required PHP extensions are not installed.',
|
|
'error_disk_space_insufficient' => 'Insufficient disk space.',
|
|
'error_disk_space_unknown' => 'Unable to determine disk space.',
|
|
'error_directory_not_writable' => 'Some directories are not writable.',
|
|
|
|
// Error Messages - System (Requirements) (detailed)
|
|
'error_php_version_insufficient_detail' => 'PHP version does not meet requirements (current: :current, required: :min+)',
|
|
'error_disk_space_insufficient_detail' => 'Insufficient disk space (current: :current MB, required: :min MB)',
|
|
'error_directory_not_writable_detail' => 'Some directories are not writable. Run the command below to grant the permissions.',
|
|
'error_required_files_missing' => 'Required files are missing.',
|
|
|
|
'error_step_file_not_found' => 'Step file not found. Installation files may be corrupted.',
|
|
'error_state_file_creation_failed' => 'Unable to create installation state file (state.json). Please check write permissions for the storage/installer directory.',
|
|
'error_invalid_step_access' => 'Invalid step access',
|
|
'error_invalid_step_access_message' => 'Please follow the installation steps in order.',
|
|
|
|
// Success Messages - Database
|
|
'success_db_write_connected' => 'Write database connection and privileges verified successfully.',
|
|
'success_db_read_connected' => 'Read database connection and privileges verified successfully.',
|
|
|
|
// Success Messages - Requirements
|
|
'success_requirements_met' => 'All requirements are met.',
|
|
'success_php_version' => 'PHP version meets requirements.',
|
|
'success_php_extensions' => 'All required PHP extensions are installed.',
|
|
'success_disk_space' => 'Sufficient disk space available.',
|
|
'success_directories_writable' => 'All directories are writable.',
|
|
'success_required_files' => 'All required files exist.',
|
|
|
|
// Success Messages - Requirements (detailed)
|
|
'success_php_version_detail' => 'PHP version meets requirements (current: :current, required: :min+)',
|
|
'success_disk_space_detail' => 'Sufficient disk space available (current: :current MB, required: :min MB)',
|
|
|
|
// HTTPS Messages
|
|
'https_enabled' => 'HTTPS is enabled (recommended)',
|
|
'https_disabled' => 'HTTPS is disabled. We recommend using HTTPS for security.',
|
|
|
|
// OPcache Messages
|
|
'opcache_enabled' => 'OPcache is enabled (recommended)',
|
|
'opcache_disabled_short' => 'Disabled — pages load several times slower',
|
|
'opcache_disabled_warning' => 'OPcache is disabled. In this state, every single page view re-parses all of your site\'s PHP code from scratch. On identical hardware this can make responses several times slower, and the gap widens as traffic grows. You can continue the installation as-is, but if this server will be used in production we strongly recommend setting opcache.enable=1 in php.ini and restarting your web server.',
|
|
'opcache_unknown' => 'OPcache status could not be determined. Reading PHP settings is restricted on this server.',
|
|
|
|
// API Response Messages
|
|
'api_method_not_allowed' => 'Only POST requests are allowed.',
|
|
'api_invalid_request' => 'Invalid request data.',
|
|
'api_unexpected_error' => 'An unexpected error occurred.',
|
|
|
|
// Step Names (for helper functions)
|
|
'step_0_welcome' => 'Welcome',
|
|
'step_1_license' => 'License Agreement',
|
|
'step_2_requirements' => 'Requirements Check',
|
|
'step_3_configuration' => 'Configuration',
|
|
'step_4_extension_selection' => 'Extension Selection',
|
|
'step_5_installation' => 'Installation',
|
|
'step_6_complete' => 'Complete',
|
|
'step_unknown' => 'Unknown Step',
|
|
|
|
// Task Names (for helper functions)
|
|
'task_composer_check' => 'Checking Package Manager',
|
|
'task_composer_install' => 'Installing Required Packages',
|
|
'task_env_create' => 'Creating Configuration File',
|
|
'task_env_update' => 'Updating Configuration File',
|
|
'task_key_generate' => 'Generating Security Key',
|
|
'task_dependency_precheck' => 'Extension Dependency Precheck',
|
|
'task_db_cleanup' => 'Cleaning Up Existing Database Tables',
|
|
'task_db_migrate' => 'Creating Database Tables',
|
|
'task_db_seed' => 'Initializing Default Data',
|
|
'task_template_install' => 'Installing Admin Template',
|
|
'task_template_activate' => 'Activating Admin Template',
|
|
'task_module_install' => 'Installing Module',
|
|
'task_module_activate' => 'Activating Module',
|
|
'task_plugin_install' => 'Installing Plugin',
|
|
'task_plugin_activate' => 'Activating Plugin',
|
|
'task_user_template_install' => 'Installing User Template',
|
|
'task_user_template_activate' => 'Activating User Template',
|
|
'task_language_pack_install' => 'Installing Language Pack',
|
|
'task_cache_clear' => 'Cleaning Up Temporary Files',
|
|
'task_create_settings_json' => 'Creating Settings Files',
|
|
'task_complete_flag' => 'Finalizing Installation',
|
|
'task_config_cache' => 'Building Configuration Cache',
|
|
'task_unknown' => 'Unknown Task',
|
|
|
|
// Task Group Names
|
|
'task_group_environment' => 'Environment Setup',
|
|
'task_group_database' => 'Database',
|
|
'task_group_admin_templates' => 'Admin Templates',
|
|
'task_group_modules' => 'Modules',
|
|
'task_group_plugins' => 'Plugins',
|
|
'task_group_user_templates' => 'User Templates',
|
|
'task_group_language_packs' => 'Language Packs',
|
|
'task_group_finalize' => 'Finalize',
|
|
|
|
// Group Status Labels
|
|
'status_pending' => 'Pending',
|
|
'status_in_progress' => 'In Progress',
|
|
'status_completed' => 'Completed',
|
|
'status_failed' => 'Failed',
|
|
'status_aborted' => 'Aborted',
|
|
|
|
// Error Messages - Worker (Composer)
|
|
'error_composer_not_installed' => 'Composer is not installed.',
|
|
'error_composer_install_failed' => 'Composer dependency installation failed',
|
|
|
|
// Log Messages - Worker (Composer)
|
|
'log_composer_check_success' => 'Composer check completed',
|
|
'log_composer_check_skipped_bundled' => 'Composer check skipped — bundled vendor mode',
|
|
'log_composer_check_auto_fallback' => 'Composer not installed — will auto-fallback to bundled vendor mode',
|
|
'log_composer_already_installed' => 'Composer dependencies are already installed',
|
|
'log_composer_install_success' => 'Composer dependency installation completed',
|
|
'log_composer_vendor_without_lock' => 'vendor directory exists but composer.lock is missing (incomplete state)',
|
|
'log_composer_removing_vendor' => 'Removing vendor directory and reinstalling...',
|
|
'log_composer_vendor_deleted' => 'vendor directory deleted',
|
|
'log_composer_vendor_delete_failed' => 'Failed to delete vendor directory (continuing anyway)',
|
|
'log_composer_installing_from_lock' => 'Installing dependencies from composer.lock...',
|
|
'log_composer_fresh_install' => 'Installing new Composer dependencies...',
|
|
'log_composer_cache_cleared' => 'Cleared previous package cache',
|
|
|
|
// Error Messages - Worker (.env)
|
|
'error_env_example_not_found' => '.env.example file not found',
|
|
'error_env_create_failed' => '.env file creation failed',
|
|
'error_env_not_found' => '.env file not found.',
|
|
|
|
// Log Messages - Worker (.env)
|
|
'log_env_create_success' => '.env file creation completed',
|
|
'log_env_update_success' => '.env file updated successfully',
|
|
'log_env_readonly_skip' => '.env file is read-only, skipping update.',
|
|
'log_env_flag_skipped' => '.env file is read-only, skipping installation completion flag.',
|
|
|
|
// Error Messages - Worker (Key)
|
|
'error_key_generate_failed' => 'Application key generation failed',
|
|
|
|
// Log Messages - Worker (Key)
|
|
'log_key_generate_success' => 'Application key generation completed',
|
|
|
|
// Error Messages - Worker (Database)
|
|
'error_db_migrate_failed' => 'Database table creation failed',
|
|
'error_db_seed_failed' => 'Default data initialization failed',
|
|
|
|
// Log Messages - Worker (Database)
|
|
'log_db_migrate_success' => 'Database migration completed',
|
|
'log_db_seed_success' => 'Database seeding completed',
|
|
|
|
// Error Messages - Worker (Template)
|
|
'error_template_install_failed' => 'Template installation failed',
|
|
'error_template_activate_failed' => 'Template activation failed',
|
|
|
|
// Log Messages - Worker (Template)
|
|
'log_template_install_success' => 'Template installation completed',
|
|
'log_template_activate_success' => 'Template activation completed',
|
|
|
|
// Error Messages - Worker (Module)
|
|
'error_module_install_failed' => 'Module installation failed',
|
|
'error_module_activate_failed' => 'Module activation failed',
|
|
|
|
// Log Messages - Worker (Module)
|
|
'log_module_install_success' => 'Module installation completed',
|
|
'log_module_activate_success' => 'Module activation completed',
|
|
|
|
// Error Messages - Worker (Plugin)
|
|
'error_plugin_install_failed' => 'Plugin installation failed',
|
|
'error_plugin_activate_failed' => 'Plugin activation failed',
|
|
|
|
// Log Messages - Worker (Plugin)
|
|
'log_plugin_install_success' => 'Plugin installation completed',
|
|
'log_plugin_activate_success' => 'Plugin activation completed',
|
|
|
|
// Error Messages - Worker (User Template)
|
|
'error_user_template_install_failed' => 'User template installation failed',
|
|
'error_user_template_activate_failed' => 'User template activation failed',
|
|
|
|
// Log Messages - Worker (User Template)
|
|
'log_user_template_install_success' => 'User template installation completed',
|
|
'log_user_template_activate_success' => 'User template activation completed',
|
|
|
|
// Error/Log Messages - Worker (Language Pack)
|
|
'error_language_pack_install_failed' => 'Language pack installation failed',
|
|
'log_language_pack_install_success' => 'Language pack installation completed',
|
|
'warning_language_pack_install_partial' => 'Language pack install partially failed: :identifier (continuing)',
|
|
|
|
// Error Messages - Worker (Cache)
|
|
'error_cache_clear_failed' => 'Cache clearing failed',
|
|
'error_config_cache_failed' => 'Configuration cache build failed',
|
|
|
|
// Log Messages - Worker (Cache)
|
|
'log_cache_clear_success' => 'Cache clearing completed',
|
|
'log_config_cache_success' => 'Configuration cache built',
|
|
|
|
// Error Messages - Worker (Settings JSON)
|
|
'error_settings_json_failed' => 'Settings file creation failed',
|
|
|
|
// Log Messages - Worker (Settings JSON)
|
|
'log_creating_settings' => 'Creating settings JSON files...',
|
|
'log_settings_json_created' => 'Settings JSON files created successfully',
|
|
|
|
// Error Messages - Worker (Admin)
|
|
'error_autoload_not_found' => 'vendor/autoload.php file not found',
|
|
'error_app_bootstrap_not_found' => 'bootstrap/app.php file not found',
|
|
|
|
// Log Messages - Worker (Complete)
|
|
'log_complete_flag_success' => 'Installation completion flag set successfully',
|
|
'log_installation_completed' => 'Installation completed successfully',
|
|
'log_installation_failed' => 'Installation failed',
|
|
'log_installation_task_failed' => '[Failed] :task: :message',
|
|
'log_installation_exception' => '[Failed] Installation error occurred: :error',
|
|
|
|
// Worker Log Messages (Task Progress)
|
|
'log_task_in_progress' => ':task in progress...',
|
|
'log_task_completed' => ':task completed',
|
|
'log_task_skipped' => ':task (already exists, skipped)',
|
|
'manual_commands_guide' => '💡 You can run the following commands manually:',
|
|
'log_separator' => '========================================',
|
|
'log_error_occurred' => '❌ Error occurred: :error',
|
|
'log_env_file_created' => '.env file created successfully',
|
|
'log_env_flag_added' => 'Installation complete flag added to .env file',
|
|
'log_installed_flag_created' => 'g7_installed flag file created',
|
|
'log_state_updated' => 'Installation state updated successfully',
|
|
'log_all_tasks_completed' => '🎉 All installation tasks completed successfully!',
|
|
'log_already_completed' => ':task (already completed)',
|
|
|
|
// Worker Abort Messages
|
|
'abort_connection_lost' => '[Aborted] Browser connection lost.',
|
|
'abort_rollback_start' => "[Aborted] Starting rollback for current task ':task'.",
|
|
'abort_rollback_success' => '[Aborted] Rollback completed: :message',
|
|
'abort_rollback_failed' => '[Aborted] Rollback failed: :message (continuing)',
|
|
'abort_no_rollback_needed' => '[Aborted] No rollback needed. (current_task is null or already completed)',
|
|
'abort_by_user' => '[Aborted] User aborted installation. (Current task: :task)',
|
|
'abort_installation_stopped' => 'Installation aborted.',
|
|
|
|
// Worker Failed Task Rollback Messages
|
|
'failed_rollback_start' => "[Failed] Starting rollback for failed task ':task'.",
|
|
'failed_rollback_success' => '[Failed] Rollback completed: :message',
|
|
'failed_rollback_failed' => '[Failed] Rollback failed: :message',
|
|
'failed_rollback_manual_cleanup' => '[Notice] Rollback failed. Please manually clean up the database and try installation again.',
|
|
'failed_rollback_manual_cleanup_detail' => 'Use a database management tool (such as phpMyAdmin) to delete created tables or reset the database, then retry installation.',
|
|
'failed_rollback_db_restart' => '[Notice] Database has been rolled back. On retry, installation will restart from database setup.',
|
|
'failed_rollback_retry' => '[Notice] The task failed. Please try the installation again.',
|
|
'failed_rollback_retry_detail' => 'On retry, installation will resume from the failed task. If the problem persists, refer to the manual commands above.',
|
|
|
|
// Worker SSE Connection Messages
|
|
'sse_connection_established' => 'SSE connection established',
|
|
'sse_method_not_allowed' => 'Method not allowed. SSE requires GET request.',
|
|
|
|
// DB Task No Abort Messages
|
|
'db_task_no_abort' => 'Cannot abort during database operations. The abort will happen after the current task completes.',
|
|
'db_task_in_progress' => 'Database operation in progress...',
|
|
|
|
// Worker Error Detail Messages
|
|
'error_composer_process_failed' => 'Failed to start composer install process',
|
|
'error_composer_exit_code' => 'Composer install failed with exit code: :code',
|
|
'error_env_example_not_found_detail' => '.env.example file not found at: :path',
|
|
'error_env_write_failed' => 'Failed to write .env file at: :path',
|
|
'error_complete_flag_failed' => 'Installation completion flag setting failed',
|
|
'error_unexpected_exception' => 'An unexpected error has occurred',
|
|
|
|
// install-process.php Messages
|
|
'error_method_not_allowed' => 'Only POST requests are allowed.',
|
|
'error_config_not_in_session' => 'Configuration not found in session. Please complete Step 3 first.',
|
|
'error_required_fields_missing' => 'Required fields are missing: :fields',
|
|
'log_installation_config_saved' => 'Installation configuration saved - Waiting for SSE connection',
|
|
'success_installation_started' => 'Installation started successfully.',
|
|
'error_installation_start_failed' => 'Installation process start failed',
|
|
'error_installation_start_exception' => 'Error occurred while starting installation: :error',
|
|
|
|
// get-install-state.php Messages
|
|
'error_get_method_required' => 'Only GET requests are allowed.',
|
|
'error_state_query_failed' => 'An error occurred while querying installation state.',
|
|
|
|
// Page Refresh/Leave Warnings (Browser shows default message, but clarifying intent)
|
|
'confirm_leave_installation' => 'Installation is in progress. Leaving this page may cause installation issues.',
|
|
'confirm_resume_installation' => 'Installation was in progress. Would you like to resume the installation?',
|
|
'resume_installation_btn' => 'Resume Installation',
|
|
'cancel_installation_btn' => 'Cancel',
|
|
|
|
// Installation Already Completed Messages
|
|
'installation_already_completed' => 'Installation Complete',
|
|
'installation_already_completed_message' => 'Gnuboard7 is already installed. Redirecting to homepage...',
|
|
|
|
// URL Parameter Access Messages
|
|
'url_parameter_not_supported' => 'URL Parameter Not Supported',
|
|
'url_parameter_redirect_message' => 'The installation process is managed by sessions. Redirecting to the current Step :current instead of requested Step :requested.',
|
|
|
|
// Installation Abort Related
|
|
'abort_installation' => 'Abort Installation',
|
|
'aborting' => 'Aborting',
|
|
'confirm_abort_installation' => 'Are you sure you want to abort the installation? The current installation progress will be preserved, and you can resume from where you left off later.',
|
|
'installation_aborted' => 'Installation Aborted',
|
|
'installation_aborted_message' => 'The installation was interrupted due to browser closure or refresh. You can resume the installation from where it was interrupted.',
|
|
'clean_state' => 'Clean State',
|
|
'cleaning' => 'Cleaning',
|
|
'state_cleaned' => 'State has been cleaned',
|
|
'clean_failed' => 'Clean failed',
|
|
'clean_error' => 'Error occurred while cleaning',
|
|
'resuming' => 'Resuming',
|
|
'resume_failed' => 'Resume failed',
|
|
'resume_error' => 'Error occurred while resuming',
|
|
'abort_failed' => 'Abort failed',
|
|
'abort_error_occurred' => 'Error occurred while aborting',
|
|
|
|
// Validation Error Messages (validation.php)
|
|
'validation_required' => ':field is required.',
|
|
'validation_email' => ':field must be a valid email address.',
|
|
'validation_min' => ':field must be at least :min characters.',
|
|
'validation_max' => ':field must not exceed :max characters.',
|
|
'validation_url' => ':field must be a valid URL.',
|
|
'validation_alpha_num' => ':field may only contain letters and numbers.',
|
|
'validation_alpha_num_underscore' => ':field may only contain lowercase letters, numbers, and underscores (_).',
|
|
'validation_starts_with_alpha' => ':field must start with a lowercase letter.',
|
|
'validation_confirmed' => ':field confirmation does not match.',
|
|
'validation_numeric' => ':field must be a number.',
|
|
'validation_integer' => ':field must be an integer.',
|
|
'validation_in' => ':field must be one of: :values',
|
|
|
|
// Field Labels (validation.php)
|
|
'fields' => [
|
|
'db_host' => 'Database Host',
|
|
'db_port' => 'Database Port',
|
|
'db_database' => 'Database Name',
|
|
'db_username' => 'Database Username',
|
|
'db_password' => 'Database Password',
|
|
'db_write_host' => 'Write Database Host',
|
|
'db_write_port' => 'Write Database Port',
|
|
'db_write_database' => 'Write Database Name',
|
|
'db_write_username' => 'Write Database Username',
|
|
'db_write_password' => 'Write Database Password',
|
|
'db_prefix' => 'Table Prefix',
|
|
'db_read_host' => 'Read Database Host',
|
|
'db_read_port' => 'Read Database Port',
|
|
'db_read_database' => 'Read Database Name',
|
|
'db_read_username' => 'Read Database Username',
|
|
'db_read_password' => 'Read Database Password',
|
|
'app_name' => 'Site Name',
|
|
'app_url' => 'Site URL',
|
|
'admin_name' => 'Admin Name',
|
|
'admin_language' => 'Admin Language',
|
|
'admin_email' => 'Admin Email',
|
|
'admin_password' => 'Admin Password',
|
|
'admin_password_confirmation' => 'Admin Password Confirmation',
|
|
'email' => 'Email',
|
|
'password' => 'Password',
|
|
'password_confirmation' => 'Password Confirmation',
|
|
],
|
|
|
|
// JavaScript Client Messages (installer.js)
|
|
'testing_connection' => 'Testing connection...',
|
|
'connection_failed_prefix' => 'Connection failed:',
|
|
'validation_incomplete_alert' => 'Please complete all required fields and database connection tests.',
|
|
'validation_incomplete_title' => 'Please complete the following items:',
|
|
'confirm_leave_page' => 'Settings have not been saved. Are you sure you want to leave this page?',
|
|
'installation_in_progress_alert' => 'Installation is in progress. Do you want to go back to the settings page?',
|
|
'confirm_go_to_settings' => 'Do you want to go back to the settings page?',
|
|
'confirm_go_to_settings_simple' => "Do you want to go back to the settings page?\n\nInstallation state will be reset and all tasks will start from the beginning.\n\n⚠️ Database tables will NOT be deleted automatically.\nPlease clean up manually using phpMyAdmin if needed.",
|
|
'confirm_go_to_settings_title' => 'Go to Settings Page',
|
|
'confirm_go_to_settings_desc' => 'Installation state will be reset and all tasks will start from the beginning.\n\n⚠️ Database tables will NOT be deleted automatically. Please clean up manually using phpMyAdmin if needed.',
|
|
'confirm_go_to_settings_btn' => 'Go',
|
|
'reset_db_checkbox_label' => 'Reset database (delete created tables)',
|
|
'error_state_reset_failed' => 'Failed to reset state.\n\n:message\n\nPlease refresh the page and try again.',
|
|
'confirm_force_go_to_settings' => 'An error occurred while resetting state.\n\nDo you still want to go to the settings page?',
|
|
'view_error_details' => 'View error details',
|
|
'installation_error_occurred' => 'An error occurred during installation.',
|
|
'installation_start_error' => 'Error starting installation',
|
|
'installation_start_failed' => 'Unable to start installation.',
|
|
'unknown_error_occurred' => 'An unknown error has occurred.',
|
|
|
|
// SSE connection failure messages
|
|
'sse_connection_timeout' => 'SSE real-time connection failed. Please check server configuration or refresh the page.',
|
|
'sse_server_config_guide' => 'If you are the server administrator, please check the following settings:
|
|
|
|
[Nginx Configuration]
|
|
location /install/api/ {
|
|
proxy_buffering off;
|
|
proxy_cache off;
|
|
proxy_read_timeout 600s;
|
|
}
|
|
|
|
[Apache Configuration]
|
|
# .htaccess or httpd.conf
|
|
<Location /install/api/>
|
|
SetEnv no-gzip 1
|
|
</Location>
|
|
|
|
[PHP Configuration]
|
|
// Add to the top of install-worker.php
|
|
ini_set(\'output_buffering\', \'off\');
|
|
ini_set(\'zlib.output_compression\', \'off\');
|
|
@apache_setenv(\'no-gzip\', 1);
|
|
|
|
[Shared Hosting]
|
|
Contact your hosting provider about SSE (Server-Sent Events) support.
|
|
Firewalls or proxies may be blocking long-lived HTTP connections.',
|
|
|
|
// Installation mode (SSE / polling)
|
|
'installation_mode_label' => 'Installation Mode',
|
|
'installation_mode_sse_title' => 'Real-time Streaming (SSE) — Recommended',
|
|
'installation_mode_sse_desc' => 'The server streams progress in real time. Fastest and most reliable in standard environments.',
|
|
'installation_mode_polling_title' => 'Compatibility Mode (Polling)',
|
|
'installation_mode_polling_desc' => 'Use this when SSE connection errors occur behind an Nginx proxy, shared hosting, etc. Status is polled every second.',
|
|
'sse_fallback_confirm' => 'SSE connection failed.\n\nWould you like to retry in compatibility mode (polling)?',
|
|
'sse_probe_incompat_use_polling' => "SSE real-time connection is not available in this environment.\n\nProceed with installation in compatibility mode (polling)?\n\n[OK] Start installation in polling mode\n[Cancel] Return to start screen",
|
|
'start_installation_button' => 'Start Installation',
|
|
|
|
// Step 4 dependency warnings
|
|
'dependency_warning_title' => 'Missing Dependencies Detected',
|
|
'dependency_warning_description' => 'The following extensions are required. Click "Auto-select required items" to resolve them in one click.',
|
|
'dependency_auto_select' => 'Auto-select required items',
|
|
'dependency_missing_tooltip' => 'Please resolve dependencies first',
|
|
'dependency_precheck_failed' => 'Dependency precheck failed — return to Step 4 and select the missing modules/plugins',
|
|
|
|
// Step 3 existing database detection
|
|
'db_existing_g7_badge' => 'Existing G7 installation detected',
|
|
'db_existing_foreign_badge' => 'Foreign data detected',
|
|
'db_existing_mixed_badge' => 'Mixed G7 + foreign tables',
|
|
'db_existing_g7_title' => 'Existing G7 Installation Detected',
|
|
'db_existing_foreign_title' => 'Foreign Data Detected',
|
|
'db_existing_mixed_title' => 'Mixed Data Detected',
|
|
'db_existing_generic_title' => 'Existing Tables Detected',
|
|
'db_existing_g7_desc' => 'The selected database already contains a G7 installation. Forcing the install will drop the existing G7 tables that start with the table prefix you entered. Back up first.',
|
|
'db_existing_foreign_desc' => 'The selected database contains unknown tables. Forcing the install will only drop tables that start with the table prefix you entered; tables with a different prefix are preserved. Back up first.',
|
|
'db_existing_mixed_desc' => 'The selected database contains a mix of G7 and other tables. Forcing the install will only drop tables that start with the table prefix you entered; tables with a different prefix are preserved.',
|
|
'db_existing_generic_desc' => 'The selected database contains existing tables. Forcing the install will only drop tables that start with the table prefix you entered.',
|
|
'db_existing_tables_list' => 'Detected tables (up to 20):',
|
|
'db_backup_guide' => 'Backup command example (verify host/user/database before running):',
|
|
'db_backup_confirmed' => 'I have backed up and agree that existing tables starting with my table prefix will be dropped',
|
|
'error_db_cleanup_consent_required' => 'You must consent to dropping existing tables before proceeding to the next step.',
|
|
'db_force_proceed_drop' => 'Drop existing tables and install',
|
|
'db_force_proceed_confirmed' => 'Force install mode (existing tables will be dropped)',
|
|
'log_db_cleanup_skipped' => 'Skipping existing table cleanup (no action)',
|
|
'log_db_cleanup_empty' => 'No existing tables. Skipping cleanup.',
|
|
'log_db_cleanup_dropping' => 'Dropping {count} existing tables...',
|
|
'log_db_cleanup_done' => 'Dropped {count} existing tables.',
|
|
'error_db_cleanup_failed' => 'Failed to clean up existing database tables',
|
|
|
|
// Dark Mode
|
|
'toggle_theme' => 'Toggle Theme',
|
|
'dark_mode' => 'Dark Mode',
|
|
'light_mode' => 'Light Mode',
|
|
|
|
// Step 4: Extension Selection
|
|
'extension_selection_description' => 'Select the extensions to install. Admin template is required.',
|
|
'loading_extensions' => 'Loading extensions...',
|
|
'admin_templates' => 'Admin Templates',
|
|
'admin_templates_description' => 'Select a template for the admin panel.',
|
|
'user_templates' => 'User Templates',
|
|
'user_templates_description' => 'Select a template for the front pages.',
|
|
'modules' => 'Modules',
|
|
'modules_description' => 'Select modules to install. Modules provide major features like boards and e-commerce.',
|
|
'plugins' => 'Plugins',
|
|
'plugins_description' => 'Select plugins to install. Plugins provide additional features like payments and notifications.',
|
|
'language_packs' => 'Language Packs',
|
|
'language_packs_description' => 'Select bundled language packs for additional language support. Each pack requires its target extension to be selected.',
|
|
'optional' => 'Optional',
|
|
'no_extensions_found' => 'No extensions available.',
|
|
'no_user_templates' => 'No user templates available.',
|
|
'no_modules' => 'No modules available.',
|
|
'no_plugins' => 'No plugins available.',
|
|
'no_language_packs' => 'No bundled language packs available.',
|
|
'language_pack_disabled_by_extension' => 'Disabled — its target extension is not selected.',
|
|
'language_pack_scope_core' => 'Core',
|
|
'language_pack_scope_module' => 'Module',
|
|
'language_pack_scope_plugin' => 'Plugin',
|
|
'language_pack_scope_template' => 'Template',
|
|
'bulk_select_all_optional' => 'Select all available items',
|
|
'bulk_select_section' => 'Select all',
|
|
|
|
// Brand name
|
|
'brand_name' => 'Gnuboard7',
|
|
|
|
// Step 3 — Vendor installation mode
|
|
'vendor_mode_title' => 'Vendor Installation Mode',
|
|
'vendor_mode_description' => 'Choose how to install PHP package dependencies (vendor/).',
|
|
'vendor_mode_auto_title' => 'Auto',
|
|
'vendor_mode_auto_description' => 'Use Composer when available, fall back to bundled vendor when not.',
|
|
'vendor_mode_auto_status_ok' => 'Environment auto-detected',
|
|
'vendor_mode_composer_title' => 'Run Composer',
|
|
'vendor_mode_composer_description' => 'Install latest versions via composer install (requires internet + proc_open).',
|
|
'vendor_mode_composer_status_ok' => 'proc_open available',
|
|
'vendor_mode_composer_status_blocked' => 'proc_open() blocked — unavailable',
|
|
'vendor_mode_bundled_title' => 'Use Bundled Vendor',
|
|
'vendor_mode_bundled_description' => 'Extract vendor-bundle.zip (offline install, composer not required).',
|
|
'vendor_mode_bundled_status_ok' => 'vendor-bundle.zip found',
|
|
'vendor_mode_bundled_status_no_ziparchive' => 'ZipArchive extension missing — unavailable',
|
|
'vendor_mode_bundled_status_no_zip' => 'vendor-bundle.zip not found — unavailable',
|
|
'vendor_mode_badge_recommended' => 'Recommended',
|
|
'vendor_mode_badge_dev' => 'Development',
|
|
'vendor_mode_badge_shared' => 'Shared hosting',
|
|
'vendor_mode_change_later_html' => 'You can change this later via <code>php artisan core:update --vendor-mode=...</code>.',
|
|
|
|
// Installation stuck detection
|
|
'error_installation_stuck' => 'Installation has stopped responding. The server worker may be stuck running a command. Please refresh and retry. If the problem persists, check storage/logs/installation.log.',
|
|
'extension_load_failed' => 'Failed to load extension list.',
|
|
'no_admin_template_error' => 'Admin template is required but not found. Please ensure at least one admin template exists in the templates directory.',
|
|
'selection_summary' => 'Selection Summary',
|
|
'selected_count' => ':count selected',
|
|
'admin_template_required' => 'At least one admin template must be selected.',
|
|
'proceed_to_installation' => 'Proceed to Installation',
|
|
'version' => 'Version',
|
|
'select' => 'Select',
|
|
'selected' => 'Selected',
|
|
'dependencies' => 'Dependencies',
|
|
'dependency_type_module' => 'Module',
|
|
'dependency_type_plugin' => 'Plugin',
|
|
'dependency_type_admin_template' => 'Admin Template',
|
|
'dependency_type_user_template' => 'User Template',
|
|
'dependency_type_other' => 'Other',
|
|
'dep_auto_badge_label' => 'Required dependency',
|
|
'dep_lock_message' => ':names requires this item. Please deselect that extension first.',
|
|
'dep_version_required' => 'Required',
|
|
'dep_version_available' => 'Available',
|
|
'author' => 'Author',
|
|
'retry' => 'Retry',
|
|
'select_all' => 'Select All',
|
|
'deselect_all' => 'Deselect All',
|
|
|
|
// install-worker.php i18n keys
|
|
'db_task_abort_detected_before_start' => '[DB Task] Abort detected before start - skipping task.',
|
|
'db_task_failed_rollback_start' => '[DB Task] :task failed - starting rollback.',
|
|
'db_task_abort_reason_connection' => 'Connection lost',
|
|
'db_task_abort_reason_user' => 'User requested',
|
|
'db_task_completed_abort_detected' => '[DB Task] Abort detected after :task completed (:reason) - starting rollback.',
|
|
'db_task_completed_rollback_start' => '[Aborted] Starting rollback after :task completed.',
|
|
'log_removing_state_file' => 'Removing installer state file...',
|
|
'log_state_file_removed' => 'Installer state file removed successfully.',
|
|
'log_state_file_remove_failed' => 'Warning: Failed to remove installer state file.',
|
|
'error_worker_exception' => 'Installation worker SSE exception',
|
|
|
|
// rollback-functions.php i18n keys
|
|
'log_prefix_rollback' => '[Rollback]',
|
|
'log_prefix_force_rollback' => '[Force Rollback]',
|
|
'rollback_not_needed_recreatable' => 'Rollback not needed (can be recreated)',
|
|
'rollback_not_needed_overwritable' => 'Rollback not needed (can be overwritten on reinstall/reactivation)',
|
|
'rollback_unknown_task' => 'Unknown task: :task',
|
|
'rollback_error' => '[Rollback Error] :task: :error',
|
|
'rollback_exception' => 'Exception during rollback: :error',
|
|
'rollback_migrate_start' => 'Starting migration rollback (migrate:rollback).',
|
|
'rollback_migrate_result' => 'migrate:rollback result: :result',
|
|
'rollback_migrate_success' => 'Migration rollback completed',
|
|
'rollback_migrate_failed_code' => 'Migration rollback failed (returnCode: :code)',
|
|
'rollback_migrate_failed' => 'Migration rollback failed',
|
|
'rollback_migrate_error' => 'Error during migration rollback: :error',
|
|
'rollback_seed_no_config' => 'No DB configuration found. Skipping seed rollback.',
|
|
'rollback_seed_already_done' => 'Seed already completed (rollback not needed)',
|
|
'rollback_seed_interrupted' => 'Seed was interrupted. Truncating tables.',
|
|
'rollback_seed_force_truncate' => 'Force truncating seed data.',
|
|
'rollback_table_truncated' => "Table ':table' truncated.",
|
|
'rollback_table_truncate_skipped' => "Table ':table' TRUNCATE skipped: :error",
|
|
'rollback_seed_data_deleted' => 'Seed data deleted.',
|
|
'rollback_db_connection_failed' => 'DB connection failed: :error',
|
|
'rollback_db_connection_failed_skip' => 'DB connection failed. Skipping seed rollback.',
|
|
'rollback_seed_error' => 'Error during seed processing: :error',
|
|
'rollback_env_flag_removed' => 'Removed INSTALLER_COMPLETED from .env.',
|
|
'rollback_installed_flag_removed' => 'Deleted g7_installed file.',
|
|
'rollback_runtime_removed' => 'Cleaned up installer runtime config.',
|
|
'error_worker_busy' => 'Another install worker is in progress. Please retry shortly.',
|
|
'rollback_complete_flag_removed' => 'Installation completion flags removed: :details',
|
|
'rollback_complete_flag_error' => 'Error removing completion flag: :error',
|
|
'rollback_no_current_task' => 'No current task to rollback. (current_task is null)',
|
|
'rollback_task_already_completed' => "':task' is already completed. (rollback not needed)",
|
|
'rollback_current_task_start' => "[Aborted] Starting rollback for current task ':task'.",
|
|
'rollback_no_completed_tasks' => 'No completed tasks to rollback.',
|
|
'rollback_checking_tasks' => 'Checking rollbackable tasks...',
|
|
'rollback_no_matching_tasks' => 'No tasks to rollback. (no matching tasks in rollbackable list)',
|
|
'rollback_tasks_to_rollback' => 'Tasks to rollback: :tasks',
|
|
'rollback_task_rolling_back' => "Rolling back ':task'...",
|
|
'rollback_task_success' => "':task' rollback succeeded",
|
|
'rollback_task_failed' => "':task' rollback failed: :error",
|
|
'manual_cmd_settings_json' => 'settings.json is generated automatically. Please retry the installation.',
|
|
|
|
// state-management.php i18n keys
|
|
'state_reset_requested' => 'Requested navigation to settings page.',
|
|
'state_reset_db_notice' => 'DB is not automatically reset. Please clean up manually if needed.',
|
|
'state_save_failed' => 'Failed to save state file.',
|
|
'state_reset_completed' => 'Installation state has been reset. (Moving to Step :step)',
|
|
'abort_api_requested' => '[Abort API] Abort requested - user requested installation abort',
|
|
'abort_api_current_status' => '[Abort API] Current installation_status: :status',
|
|
'abort_api_current_task' => '[Abort API] Current current_task: :task',
|
|
'abort_api_completed_count' => '[Abort API] Completed task count: :count',
|
|
'abort_api_already_completed' => 'Installation is already completed and cannot be aborted.',
|
|
'abort_api_already_aborted' => 'Installation is already aborted.',
|
|
'abort_api_not_running' => 'No installation to abort.',
|
|
'abort_user_requested' => 'User requested installation abort.',
|
|
'abort_api_status_change' => '[Abort API] Changing installation_status to "aborted".',
|
|
'abort_api_save_result' => '[Abort API] state.json save result: :result',
|
|
'abort_api_verify_status' => '[Abort API] Verify after save - installation_status: :status',
|
|
'error_state_management' => 'State management error',
|
|
'error_log_prefix' => '[Error] :error',
|
|
|
|
// functions.php i18n keys
|
|
'error_db_name_username_required' => 'Database name and username are required.',
|
|
'error_db_invalid_parameter' => 'Database :field contains characters that are not allowed.',
|
|
'error_db_connection_failed' => 'Database connection failed: :error',
|
|
'error_privilege_check_failed' => 'Error occurred during privilege check',
|
|
|
|
// Required file setup (Step 5)
|
|
'file_setup_title' => 'Create Required Files',
|
|
'file_setup_description' => 'The following files are required in the project root to proceed with installation.',
|
|
'file_setup_guide' => 'Run the following command in your terminal from the project root directory:',
|
|
'file_check_button' => 'Verify files',
|
|
'file_checking' => 'Checking...',
|
|
'files_not_found_yet' => 'Required files not found yet. Please create the files and try again.',
|
|
'copy_command' => 'Copy',
|
|
'copied' => 'Copied!',
|
|
|
|
// Step 2 permission guidance
|
|
'permission_fix_guide' => 'Run the following command in your terminal or SSH to grant permissions:',
|
|
'ownership_mismatch_option_group' => '[Recommended] Group sharing — change group to the web server user and grant write permission:',
|
|
'ownership_mismatch_option_chown' => '[Alternative 1] Change owner — transfer ownership to the web server user:',
|
|
'ownership_mismatch_option_777' => '[Alternative 2] Last resort — grant write permission to everyone (reduced security, not recommended):',
|
|
'ownership_mismatch_hint' => '※ Current owner: :owner / Web server user: :web_user. Choose the option that matches your environment.',
|
|
'permission_fallback_title' => 'If the command above does not resolve the issue',
|
|
'permission_fallback_detail' => 'Some environments (e.g. dedicated servers) may require: chmod -R 775 :path',
|
|
'permission_windows_hint' => '※ On Windows, open Command Prompt (cmd) as Administrator and run the command. Alternatively, you can set permissions via folder Properties → Security tab.',
|
|
'directory_create_guide' => 'Run the following command to create the missing directories:',
|
|
|
|
// Directory names (Step 2)
|
|
'dir_bootstrap_cache' => 'Bootstrap cache directory',
|
|
'dir_vendor' => 'Packages directory',
|
|
'dir_modules' => 'Modules directory',
|
|
'dir_modules_pending' => 'Modules pending directory',
|
|
'dir_plugins' => 'Plugins directory',
|
|
'dir_plugins_pending' => 'Plugins pending directory',
|
|
'dir_templates' => 'Templates directory',
|
|
'dir_templates_pending' => 'Templates pending directory',
|
|
|
|
// save-extensions.php i18n keys
|
|
'log_extensions_selected' => 'Extension selection complete: :admin admin template(s), :user user template(s), :modules module(s), :plugins plugin(s), :language_packs language pack(s)',
|
|
'log_extensions_saved' => 'Extension selection has been saved.',
|
|
'error_admin_template_required' => 'Please select at least one admin template.',
|
|
'error_invalid_extension_identifier' => 'Extension identifier ":identifier" is not in an allowed format (group: :group). Only letters, digits, and `._-` are accepted.',
|
|
|
|
// Core update settings
|
|
'core_update_settings' => 'Core Update Settings (Optional)',
|
|
'core_update_pending_path' => 'Update Pending Directory Path',
|
|
'core_update_pending_path_help' => 'Leave empty to use the default (storage/app/core_pending). Enter an absolute path or a path relative to the Gnuboard7 root to use a custom location.',
|
|
|
|
// 자산 URL 방식 (이슈 #486)
|
|
'asset_url_mode' => 'Asset file URL style',
|
|
'asset_url_mode_extension' => 'Use file extensions (recommended)',
|
|
'asset_url_mode_extensionless' => 'No file extensions',
|
|
'asset_url_mode_help' => 'Detected automatically from your server setup. Some servers intercept .js/.css/.json URLs and pages fail to load; choose no extensions in that case.',
|
|
'asset_url_mode_detected_extension' => 'Detected: file extensions work fine on this server.',
|
|
'asset_url_mode_detected_extensionless' => 'Detected: the server intercepts extension URLs, so no extensions was selected.',
|
|
'asset_url_mode_detected_unavailable' => 'Could not detect. If pages fail to load after installation, try switching to no extensions.',
|
|
'asset_url_mode_checking' => 'Checking…',
|
|
'asset_url_mode_unknown' => 'Unknown',
|
|
'core_update_github_url' => 'GitHub Repository URL',
|
|
'core_update_github_url_help' => 'GitHub repository URL to check for core updates.',
|
|
'core_update_github_token' => 'GitHub Access Token',
|
|
'core_update_github_token_help' => 'A GitHub Personal Access Token is required for private repositories. Leave empty for public repositories.',
|
|
'check_core_pending_path' => 'Check Path',
|
|
'dir_core_pending' => 'Core update pending directory',
|
|
'core_pending_will_be_created' => 'Directory does not exist. It will be created automatically during installation.',
|
|
'core_pending_path_ok' => 'Path is valid.',
|
|
'core_pending_info' => 'Owner: :owner, Group: :group, Permissions: :permissions',
|
|
'error_core_pending_not_directory' => 'The specified path is not a directory.',
|
|
'error_core_pending_not_writable' => 'Directory (:path) is not writable.',
|
|
'error_core_pending_parent_not_writable' => 'Parent directory (:path) is not writable, cannot create automatically.',
|
|
'error_path_required' => 'Please enter a path.',
|
|
'error_core_pending_path_invalid' => 'The path you entered is not a valid directory or is not in an allowed format.',
|
|
|
|
// PHP CLI / Composer Settings
|
|
'php_cli_settings' => 'PHP CLI Settings (Optional)',
|
|
'php_cli_settings_required' => 'PHP CLI Settings (Required)',
|
|
'php_cli_settings_help' => 'If PHP CLI is not in the system PATH or has a different version on your hosting environment, you can specify the path directly. No changes needed for typical environments.',
|
|
'php_cli_settings_help_required' => 'The default php command is not available on this server. Please specify the correct PHP CLI path and verify it.',
|
|
'php_binary_path' => 'PHP CLI Path',
|
|
'php_binary_path_help' => 'e.g. /usr/local/php82/bin/php (default: php)',
|
|
'composer_binary_path' => 'Composer Path',
|
|
'composer_binary_path_help' => 'Leave empty to auto-detect from system PATH. .phar file paths are also supported.',
|
|
'verify_version' => 'Verify Version',
|
|
'auto_detect_php' => 'Auto-detect PHP',
|
|
'detecting_php' => 'Scanning for PHP binaries...',
|
|
'detected_php_binaries' => 'Detected PHP binaries (click to select):',
|
|
'no_php_detected' => 'No PHP binaries found on this server.',
|
|
'php_detected_count' => ':count PHP binary(ies) found.',
|
|
'success_php_binary_version' => ':path — PHP :version ✓',
|
|
'error_php_path_empty' => 'PHP binary path is empty.',
|
|
'error_php_path_not_exists' => 'File does not exist: :path',
|
|
'error_php_exec_failed' => 'PHP execution failed: :path',
|
|
'error_php_version_too_low' => ':path — PHP :version (minimum :min required)',
|
|
'error_php_version_parse_failed' => 'Failed to parse PHP version.',
|
|
'error_php_cli_not_verified' => 'PHP CLI path has not been verified. Please click the "Verify Version" button.',
|
|
'error_composer_not_verified' => 'Composer execution has not been verified. Please click the "Verify Version" button.',
|
|
'error_composer_path_not_exists' => 'File does not exist: :path',
|
|
'error_composer_exec_failed' => 'Composer execution failed: :path',
|
|
'error_composer_version_parse_failed' => 'Failed to parse Composer version.',
|
|
'error_check_failed' => 'Check request failed. Please verify network or server status.',
|
|
'session_cookie_blocked_title' => 'Session Cookie Blocked',
|
|
'session_cookie_blocked_description' => 'Your browser is not preserving the installer session cookie (PHPSESSID), which may cause the installation to stall. You may proceed but it is not recommended — please try one of the workarounds below.',
|
|
'session_cookie_blocked_remedy_1' => 'Try a different browser. Incognito/Private windows usually have stricter cookie policies — a regular window is recommended.',
|
|
'session_cookie_blocked_remedy_2' => 'Disable cookie/site-data blocking in your browser and refresh the page.',
|
|
'session_cookie_blocked_remedy_3' => 'Access via IP or localhost instead of a domain name. Example: http://localhost:port/install/',
|
|
'session_cookie_blocked_technical_detail' => 'Technical detail: Installer session cookie round-trip verification failed. (Likely caused by SameSite policy, non-standard port, browser tracking protection, or similar combination.)',
|
|
'session_cookie_blocked_dismiss' => 'Dismiss warning',
|
|
'success_composer_version' => ':path — Composer :version ✓',
|
|
'composer_install_guide_title' => 'Composer Installation Guide',
|
|
'composer_install_guide_message' => 'Composer is not installed. You can install it using the following methods:',
|
|
'composer_install_guide_global' => 'Global installation (recommended):',
|
|
'composer_install_guide_local' => 'Local installation (project directory):',
|
|
'composer_install_guide_hosting' => 'Hosting environment installation (if above methods fail):',
|
|
'composer_install_guide_pwd_hint' => 'After installation, check the absolute path of the current directory with the command below:',
|
|
'composer_install_guide_phar_hint' => 'Enter the full execution command with absolute path in the Composer path field above. Example: /usr/local/php84/bin/php /home/user/g7/composer.phar',
|
|
'composer_install_guide_link' => 'For detailed instructions, visit <a href="https://getcomposer.org/download/" target="_blank" rel="noopener">getcomposer.org</a>.',
|
|
'composer_checking' => 'Checking Composer...',
|
|
'cli_status_checking' => 'Checking...',
|
|
'cli_status_verified' => '✓ Verified',
|
|
'cli_status_not_verified' => '✗ Not verified',
|
|
'cli_status_optional_bundled' => '— Optional (bundled mode)',
|
|
|
|
// Environment Check Enhancements
|
|
'required_functions' => 'Required Functions',
|
|
'required_functions_available' => 'Available',
|
|
'required_functions_disabled' => ':count disabled',
|
|
'success_required_functions' => 'Required functions (exec, proc_open, shell_exec) are all available.',
|
|
'error_disabled_functions' => 'The following functions are disabled and installation cannot proceed: :functions. Please ask your hosting provider to enable them.',
|
|
'php_cli_version' => 'PHP CLI Version',
|
|
'php_cli_version_check_skipped' => 'exec function is disabled, CLI version check skipped.',
|
|
'php_cli_version_unknown' => 'Unable to determine PHP CLI version.',
|
|
'php_cli_version_matched' => 'Matched (Web: :web, CLI: :cli)',
|
|
'php_cli_version_mismatch' => 'Mismatch (Web: :web, CLI: :cli)',
|
|
'php_cli_version_mismatch_hint' => 'Please specify the correct PHP CLI path in Step 3.',
|
|
'success_core_pending_path' => 'Path is valid and writable.',
|
|
|
|
// Combined .env guidance
|
|
'required_files_fix_guide_combined' => '.env file creation and permission setup required. Run the following command:',
|
|
|
|
// Relative path alternative
|
|
'or_relative_path' => 'Or from the G7 root directory:',
|
|
];
|